Pneumatik, Hydropneumatik, Systemtechnik
www.specken-drumag.com > Products > Application rel. sys. engineering > Compressed air system for a laser generator

Application rel. sys. engineering

We are flexible in designing and implementing fluid engineering systems. Both in the area of pressure generation and processing and in the areas of driving, controlling and moving.

 

 

Compressed air system for a laser generator


Compressed air system for a laser generator

For the periodically flushing of the glass tubes of the laser generator in laser welding and cutting machines extremely clean and try air is required. This system produces an air flow by a compressor with pressure regulator. The heat generated by compression is cooled down by a radiator to condense the main humidity in the air. Pre-set filters clean the air before it is dried down to a dew point of –30°C by a membrane dryer. Electric valves in the filters control the water drain and allow a start release for the compressor. The air coming from the dryer is finally filtered by an active carbon filter and flows through an adjustable throttle valve and a direction valve to the laser generator. Measuring sensors for humidity, pressure, temperature and flow allow an exact adjustment and controlling of the air quality.&nb

 

 

Product advice Specken Drumag Produktberatung

Drumag GmbH

Glarnerstr. 2

D-79713 Bad Säckingen


Tel. +49 7761-55 05 - 0

Fax +49 7761-55 05 - 70

info@specken-drumag.com